|
UGT-2 - ultrasonic depth-gauge cracks
it is intended for measurement on hire, including, rollers depths of defects leaving on a surface, such as cracks of heat, depth from 20 up to 80 mm at access to them, realizing EMA-WAY of excitation and reception of shift ultrasonic waves, automatic measurement of depth of cracks.
Features depth-gauge:
- Excitation and reception of shift ultrasonic waves electromagnetic-acoustic (EMA) a method
- System of the automatic signal system of defects
- System of automatic adjustment of a threshold of operation
- Smooth adjustment of frequency of excitation
- Automatic definition of depth of cracks and attitudes of amplitudes of signals
- Intuitive interface organized by 9 buttons and system of the menu
- Information may is deduced on one of 3 languages (Рус/Укр/Eng)
- Opportunity of storing up to 80 A-Scan and adjustments
- Modes " an electronic magnifier ", "frost"
- Mode "flooding" the detected signal
- Opportunity of adjustment of contrast and inverting of the image of the screen
- Recording of procedure of the control with use of universal software FERTA-WORK
- Opportunity of loading in memory defectoscope before kept in COMPUTER adjustments and A-Scan
Characteristics depth-gauge:
- Range of working frequencies - 1.00-2.50 MHz, a step of adjustment of frequency - 10 kHz
- Range measurand depths - 20-80 mm
- Dynamic range - 120 dB
- Depth of adjustment of sensitivity - 60 dB
- Duration of display - 50-220 mks
- Error of measurement of depth - no more than 2.5 mm
Operational characteristics depth-gauge:
- Temperature of operation from-20 up to +50°C
- Feed from a network - 220V/50Hz/12W
- Time of independent work from the built - in accumulator - not less than 2.5 h, and with the additional accumulator not less than 9 hours
- Sizes - 170x270x155 mm
- Weight with the accumulator - 3.6 kg
- warranty Period of work - not less than 12 months
Characteristics may be changed at the request of the Customer
|
